idefix44 Posted May 23, 2016 Report Posted May 23, 2016 srd file; where am I wrong?Attached in a zip file:- the mis file with the ships roads.- the matching srd file.In the maps.dcg file, MapAxis=North Blue ships spawn at Genova_Harbor and follow the blue paths. It's correct.I want that Red ships spawn at Crotone_Supply_Depot_Harbor and follow the red paths.But they spawn at 200_Tyrrhenian_Sea. It isn't correct.200_Tyrrhenian_Sea: 57000.00 1000.00Crotone_Supply_Depot_Harbor: 75000.00 500.00Crotone_Supply_Depot_Harbor is lower than 200_Tyrrhenian_Sea.Where am I wrong? I use the IL2DCG 3.48 version. CDG_Italy.zip Quote
JG7_X_Man Posted May 23, 2016 Report Posted May 23, 2016 The problem will more than likely lie in the .rds file Quote
Lowengrin Posted May 24, 2016 Report Posted May 24, 2016 Crotone_Supply_Depot_Harbor is probably the issue. Even though the location is in the srd file, because it uses the key words "Supply_Depot", I think DCG is treating it like a land location. Try renaming it just "Crotone_Harbor" and see if that fixes it. Quote
idefix44 Posted May 24, 2016 Author Report Posted May 24, 2016 Ok. Now the lowest location name is Crotone_Harbor. And it's the same problem. Allied ships move forward to Cagliari_Bay (from 200_Tyrrhenian_Sea). An other idea? It's like if DCG ignores the red paths... May be important: I use DCG in Dogfight Mode. CDG_Italy v2.zip Quote
Lowengrin Posted May 28, 2016 Report Posted May 28, 2016 I see an issue with your file which may or may not solve the problem. You need at least eight waypoints for each route and I noticed many of yours only have three or four. Example: [Crotone_Bay to Crotone_Harbor] 73000.00 4000.00 120.00 0 2 2.7777777777777777 73000.00 1000.00 120.00 0 2 2.7777777777777777 75000.00 500.00 120.00 Stick a few more waypoints between each of these three waypoints. Quote
idefix44 Posted May 28, 2016 Author Report Posted May 28, 2016 I see an issue with your file which may or may not solve the problem. You need at least eight waypoints for each route and I noticed many of yours only have three or four. Example: [Crotone_Bay to Crotone_Harbor] 73000.00 4000.00 120.00 0 2 2.7777777777777777 73000.00 1000.00 120.00 0 2 2.7777777777777777 75000.00 500.00 120.00 Stick a few more waypoints between each of these three waypoints. Done Sir. Each road has 9 or 10 waypoints now. But the problem isn't fixed... CDG_Italy v3.zip Quote
Lowengrin Posted June 2, 2016 Report Posted June 2, 2016 Can you also post your rds file? Thanks! Quote
idefix44 Posted June 2, 2016 Author Report Posted June 2, 2016 Can you also post your rds file? Thanks! CDG_Italy RDS.zip Quote
Lowengrin Posted June 7, 2016 Report Posted June 7, 2016 When DCG generates the mission, it puts the X/Y coordinates of each location into the locations.dcg file. According to this file: 200_Tyrrhenian_Sea 0 59000.00 1000.00 Crotone_Harbor 2 73000.00 4000.00 Crotone_Bay 0 74000.00 3000.00 While you have this: [Crotone_Bay to Crotone_Harbor] 73000.00 4000.00 120.00 0 2 2.7777777777777777 71000.00 4000.00 120.00 0 2 2.7777777777777777 69000.00 4000.00 120.00 0 2 2.7777777777777777 67000.00 3000.00 120.00 0 2 2.7777777777777777 67000.00 1000.00 120.00 0 2 2.7777777777777777 69000.00 2000.00 120.00 0 2 2.7777777777777777 71000.00 2000.00 120.00 0 2 2.7777777777777777 73000.00 2000.00 120.00 0 2 2.7777777777777777 75000.00 500.00 120.00 It appears Crotone_Harbor is taking from the first waypoint in this series and not the last one. This is definitely a bug. You could probably solve it by adding another "dummy" location just north of Crotone_Harbor that links to Crotone_Harbor. But I will look into fixing the bug. Quote
idefix44 Posted June 9, 2016 Author Report Posted June 9, 2016 Ok. I've downloaded and updated my IL2 DCG to 3.49b4 version. I'm sorry, but this bug isn't fixed. When the sea road is: [Crotone_Bay to Crotone_Harbor] 73000.00 4000.00 120.00 0 2 2.7777777777777777 71000.00 4000.00 120.00 0 2 2.7777777777777777 69000.00 4000.00 120.00 0 2 2.7777777777777777 67000.00 3000.00 120.00 0 2 2.7777777777777777 67000.00 1000.00 120.00 0 2 2.7777777777777777 69000.00 2000.00 120.00 0 2 2.7777777777777777 71000.00 2000.00 120.00 0 2 2.7777777777777777 73000.00 2000.00 120.00 0 2 2.7777777777777777 75000.00 500.00 120.00 I get: Crotone_Harbor 1 73000.00 2000.00 So, I add one line: [Crotone_Bay to Crotone_Harbor] 73000.00 4000.00 120.00 0 2 2.7777777777777777 71000.00 4000.00 120.00 0 2 2.7777777777777777 69000.00 4000.00 120.00 0 2 2.7777777777777777 67000.00 3000.00 120.00 0 2 2.7777777777777777 67000.00 1000.00 120.00 0 2 2.7777777777777777 69000.00 2000.00 120.00 0 2 2.7777777777777777 71000.00 2000.00 120.00 0 2 2.7777777777777777 73000.00 2000.00 120.00 0 2 2.7777777777777777 75000.00 500.00 120.00 0 2 2.7777777777777777 75000.00 100.00 120.00 and get: Crotone_Harbor 1 75000.00 500.00 The X/Y coordinates don't come from the last line but from the second to last line... A mistake in a loop, may be. Quote
Lowengrin Posted June 10, 2016 Report Posted June 10, 2016 Weird. You can fix that by adding a new second last line copies the X/Y coordinates of the last line. Quote
idefix44 Posted June 10, 2016 Author Report Posted June 10, 2016 For me, it isn't fixed. Just bypassed. A workaround. Quote
Lowengrin Posted June 10, 2016 Report Posted June 10, 2016 I'll take a second look at it when I have some time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.