tomoose

Thank you, wilco.

UPDATE: I just manually went through the squadrons.dcg file and changed the squadrons (except ours and another) to 'Unknown'. I imported this campaign into DCG. All good. Generated a mission and some of the bombers are assigned to 'English Airfield' but our 'human' squad is also on the tarmac. I saved the campaign and backed it up. Upon checking the Squadron Editor Panel, every single RAF squadron is back to being assigned to an airfield or airstrip!!!! Clearly I'm missing something. I could delete a bunch of squadrons but that would remove some of the immersion/realism. There must be a solution to this as I definitely seem to remember assigning 'Unknown' in previous campaigns without any issue. Any info is appreciated. Tomoose

We are currently running a DCG campaign using the Tempest V operating from the "British" Island on the Normandy map. Campaign creation = no probs. We do not want air-starts for ourselves. To that end I have assigned our squad to the English Airfield, a bunch of Spitfire squads to the English Airstrip (where they take off, carrier-style) and I have assigned 3 squads of Blenheims to "Unknown" to force air-starts for the bombers. The problem: When reopening DCG to generate the next mission, upon checking the Squadron Editor Panel, all of the RAF aircraft have been assigned to one of the two available island airfields which once the next mission is generated forces us (the humans) to an air start. I have to manually reassign the squads to 'airstrip' and 'unknown' each time. I had 'air starts' checked under Options and have tried unchecking it but it doesn't seem to make any difference. What am I missing? thanks, Tomoose

Hmmm, just noticed that if I clear out the eventlog that those particular panels open a lot quicker (although still slower than the other panels). As far as I know the rest of our group have their eventlogs full and yet none of the others seem to have the same 'lag' with the DCG panels as I do.

As the title implies, these panels when clicked on literally take minutes to appear. Custom Mission Panel and Campaign Settings Panel appear as soon as clicked. Mission generation takes some time but this is understandable as DCG 'calculates' and assembles the data but the Squadron Editor and Ground War Editor panels take just as long if not longer. It's not a bug but more of a settings thing or something I'm doing/not doing. Any info is appreciated.

Thanks for the response. It's good just to know that there's a possible explanation so thanks for that. I'll try your timetable.dcg suggestion. cheers, Tomoose

Our little coop group is currently doing the DCG (v3.49) Marianas campaign and attacking Saipan. I originally had 1/Squadron/week as the Axis supply rate but despite decimating the Bettys and Vals etc in over a dozen plus missions the same number always come up to meet us. I have recently switched the Axis supply rate to 20% but that doesn't seem to have made a difference. All the Axis planes, no matter how many we shoot down seem to respawn in the next mission with the same quantity. What am I missing? On a separate note, even though we are usually tasked with escorting SBDs to Saipan we are forced to do CAP over the fleet as the DCG tasked CAP goes tearing off to the end waypoint of the fleet first leaving the fleet totally exposed to the incoming Bettys and Vals. I have had to manually enter a couple of flights of friendly AI over the fleet (it's easier than rearranging the AI CAP waypoints) to compensate for the "missing" DCG tasked AI CAP. The SBDs and TBMs always seem to do a good job on Saipan regardless but there doesn't seem to be any progress with regard to actual landings despite troop ships apparently heading that way again (the first attempt was attacked by a single Emily which was apparently enough to put off the entire invasion).

The empty eventlog saga continues.... I tracked down part of the problem. I use Mission Log Reader (MLR) and it's pulling from an eventlog file and providing (semi) accurate mission data. I was able to determine where this file is located. This eventlog file for some bizarre reason is being stored in C:/..../users/appdata... and not in the IL2 directory. So the 'real' (current) eventlog file with actual data is in a different location and DCG is looking at an empty eventlog file sitting in the main IL2 folder. So I know the 'why' DCG isn't showing debriefings but cannot figure out the reason the 'other' eventlog file is being re-directed.

LogFileDate = "none" even though I've got eventlogkeep 'on' etc. Eventlog.lst is always 0kb empty. So I'm not getting any debriefs of previous missions at the start of the current mission. What am I missing? It used to work. The only difference is that I have the NG HUD mod now but that shouldn't affect this, should it?

I know it's in my settings somewhere but not sure what I missed. SITUATION: DCG not showing the previous mission results summary for our coop missions. Just getting "Nothing significant to report, select aircraft etc" at the start of each mission. We're flying a coop Tarawa campaign with HSFX. We just finished the Coral Sea campaign and the After-Action summary was being shown. Obviously I've done something different while setting up the Tarawa campaign. I thought it might be the eventlog or log as I had deleted the previous eventlog. I have Online Briefing and Save Missions 'on' in DCG itself. I can't see what I missed. Any info is appreciated. thanks......again. Tomoose

That worked, thanks. I assume other Win10 people might have similar issues so hopefully this solution will help others.

UPDATE I think I resolved the issue. On a hunch, I ran DCG "as Administrator" and bingo! I can switch panels without the horrendous wait and even the mission generation is now a few seconds as opposed to minutes. This result would lead me, again, to believe that the issue is with my Win10. Is that a reasonable assumption? Can anyone tell me why, if that's the case? Is there a way to have a shortcut default to "run as administrator" so that I don't have to go into Explorer each time and right-click on the .exe to get the administrator option? thanks again for your assistance and patience. Tomoose

UPDATE...sort of.... In an effort to zero in on the cause I redirected DCG to use my DBW as the game (instead of HSFX). I figured if DBW and DCG don't have any probs then at least I know that it's HSFX. Unfortunately I got the same result with DBW, with the same panels!!!! Aaaaaarggghhh!!! So that leads me to believe it might be a Win10 issue (this seem to all start after I switched up to Win10), as it's happening with two different versions of DCG and I know I had no issues with Win 7. While the situation is not a showstopper, it is bloody annoying and tries my patience!!!

HELP! I'm stumped on this one. I've switched eventlog and log keep "off". I've zeroed out the logs to 0kb. I've deleted my old DCG and installed 3.48. After all that it takes approx 3 minutes (I timed it) to simply change to the Squadron Editor Panel!!! I'm using HSFX v7 but haven't had this issue before. It seems it started after I switched to Win10 which I know is RAM intensive but I have 24Gig so that's not an issue. It seems to be only happening with the Squadron Editor panel, the Ground War Editor panel and the Column and Static Objects panel, the other panels are fine, does that give any clues to anyone? Ref the class and payload files suggestion: I have no idea where to start with that option. thanks again.

Fhechene; the previous campaign (Battle of Britain) was a 3rd party but now we're flying a 'stock' DCG -generated Pacific campaign (Santa Cruz). I think Razneff is probably correct in that I'm using HSFX with History, Expert modes on plus Carrier Crew V5. It's certainly not a showstopper just a bit annoying. I do however remember having this similar issue a few years ago and the log was the issue, once that was 'flushed' it speeded things up tremendously but not this time.