Wittmann Posted July 11, 2023 Report Share Posted July 11, 2023 I orded this. It"s otw. I need a desk. Mount. Holder. Any suggestions ? Quote Link to comment Share on other sites More sharing options...
Klaiber Posted July 11, 2023 Report Share Posted July 11, 2023 Regarding desk mounts, I use Monstertech: https://www.monstertechusa.com/ Great product. Quote Link to comment Share on other sites More sharing options...
Vonrd Posted July 11, 2023 Report Share Posted July 11, 2023 I cobbed together a wooden mount. BTW, the extension makes a world of difference! Klaiber 1 Quote Link to comment Share on other sites More sharing options...
Pfeil Posted July 11, 2023 Report Share Posted July 11, 2023 I can also recommend Monstertech. Great product. Massive mounts. Easily removable with clamps. Klaiber 1 Quote Link to comment Share on other sites More sharing options...
Wittmann Posted July 11, 2023 Author Report Share Posted July 11, 2023 What. Do you notice the extion gains ? You set at 130 or 170 ? Thnx for the mount. Links Quote Link to comment Share on other sites More sharing options...
Wittmann Posted July 11, 2023 Author Report Share Posted July 11, 2023 Very interesting. Monstertech. I looked, we have alot of that alum rail. Stuff at my work. If. I can source that clamp. I can make that in a day. It's on backorder on their page Klaiber and Snaggle 2 Quote Link to comment Share on other sites More sharing options...
Wittmann Posted July 12, 2023 Author Report Share Posted July 12, 2023 Any1. Have. A. Lenght / width / height. For that T-slot. Piece ? Hard to tell from pics. Mybe. 12" tall. 3" wide, 1.5 inches thick ? If i get dimensions. I think i can make that for. 50. Or less in parts Quote Link to comment Share on other sites More sharing options...
Vonrd Posted July 12, 2023 Report Share Posted July 12, 2023 U-tube is your friend... I've seen some that give dimensions. Also, I think I've seen cutting lists in DCS forum as well as IL2 in the hardware / controllers sections. Erhardt 1 Quote Link to comment Share on other sites More sharing options...
Wittmann Posted July 12, 2023 Author Report Share Posted July 12, 2023 Thnx Von... i. Got all my parts on order. 65. Heavier clamp. 500 lbs strnght, and i went with 4080 series. Black anodized tslot. Got a 10 pack of internal 90 clamps. I got 1 305 mm length will cut 50 off. 250 for vert. 5mm curf. Prob or less. So this. 4080 is wider 3,15. X 1.5. " i just need to make. 2 plates. Quote Link to comment Share on other sites More sharing options...
Wittmann Posted July 29, 2023 Author Report Share Posted July 29, 2023 https://winwingsim.com/view/goods-details.html?id=374 This is the Stick I got, 130-170 extension. How do you set up lower trigger ? it seems to be an axis, fires my cannons continuously until empty, unless I hold that lower trigger in . Any tricks on that lower would be helpful.. Mount is fabbed up temp for testing / trying positions Quote Link to comment Share on other sites More sharing options...
Vonrd Posted July 29, 2023 Report Share Posted July 29, 2023 The lower lever is an axis as well as buttons 7 & 8. #7 is with the lever released and #8 is with it fully compressed. Make sure you are mapping the cannons to Button #8 (lever fully pulled) If you release it while mapping it will map them to Button #7. Quote Link to comment Share on other sites More sharing options...
Wittmann Posted July 30, 2023 Author Report Share Posted July 30, 2023 Ok, well i got itnto work. Through. Joytokey. Using a keystroke. Seems. Like the game. Il2. Calls it button 6. For 7 and 8 Quote Link to comment Share on other sites More sharing options...
Vonrd Posted August 4, 2023 Report Share Posted August 4, 2023 There's a new SIMAPP Pro manual released in case you weren't aware https://winwingsim.com/static/assets/files/en/SIMAPP Pro 1.9.11-User Manual EN V1.2.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.